Sociedad Española de Integridad Estructural
Grupo Español de Fractura

Listado de Publicaciones
Todas estas publicaciones se ofrecen de forma gratuita y son de libre difusión. También puedes descargar las actas completas».
Sociedad Española de Integridad Estructural
Grupo Español de Fractura
Todas estas publicaciones se ofrecen de forma gratuita y son de libre difusión. También puedes descargar las actas completas».
KL.Jeon B. Marini D. François
Anales de la Mecánica de la Fractura, nº 9
. 1992
. Pág. 252
-256
Ver (.pdf): Anales09-044
Resumen: The ductile fracture behavior under mixed mode I+II loading is studied for a 316L stainless steel thermally ged for 1000 hours at 700°C. Microstructural examinations and mechanical tests (tension, Charpy impact and fracture toughness CTJ tests) were performed in three different orientations of speeimen selection (T, L and TL). Asymmetric and symmetric four-point bend specimens were tested under mixed-mode I+II and pure mode I and II loadings. Both crack opening and crack sliding displacements were measured by a triple-extensometer. The limit load and approximate Jintegral analyses were carried out. The R6 method was applied in its threc options, giving a conservative prediction of the crack Iml!atwn. With the F.A.D. derivcd from the experimental data for each mode, the crack initiation loads could be well estimated.
Localización: Aiguablava, Gerona
CEA/CEREM/DTM/SRMA, Centre d'Etudes de Saclay. 91191 Gif-sur-Yvette. France
CEA/CEREM/DTM/SRMA, Centre d'Etudes de Saclay. 91191 Gif-sur-Yvette. France
CEA/CEREM/DTM/SRMA, Centre d'Etudes de Saclay. 91191 Gif-sur-Yvette. France